Aluminium profile polishing machine for powder coating pre treatment
Aluminium profile polishing machine for powder coating pre treatment
Aluminium profile polishing machine for powder coating pre treatment
Aluminium profile polishing machine is used to clean mechanical lines, burrs on the surface of aluminum profiles before powder coating treatment. It is beneficial for the powder coating to adhere better to the surface of aluminum profiles, replacing traditional manual operations, and has the characteristics of saving labor and thorough surface treatment.
The transmission speed of the aluminium profile is controlled by the frequency conversion speed regulation motor .When using it, the worker only needs to press the button to adjust the height and width of the four sides of the profiles, check and configure the grinding wheel, and turn on the switch of the vacuum cleaner.Aluminum chips after polishing are collected by bag-type dust collector.
Technical Parameters of Aluminium profile polishing machine for powder coating pre treatment:
Maximum profile width:300MM
Maximum profile height: 200MM
Maximum profile discharge speed : 1.5 m/s
Feeding table size :460mm wide 4000mm long 750mm high
Discharge table size :460mm wide 6000mm long 750mm high
Main machine dimension: 2200mm long 1400mm wide 1700mm high
Maximum power: 21KW
Main parts list of Aluminium profile polishing machine for powder coating pre treatment:
1 frequency converter
2 Left and right rubber wheel pressing motor
3 Upper and lower rubber wheel pressing motor
4 Polishing wheel left and right clamping motor
5 polishing wheel upper and lower clamping motor
6 Polishing main shaft
7 Feeding motor
8 Electrical appliances
9 Dust collector
10 Grinding wheel Copper wire wheel/stainlesssteel wire wheel
