Aluminium extrusion die assembly machine

Aluminium extrusion die assembly machine

1.working principle

The purpose of Aluminium extrusion die assembly machine is achieved through hydraulic pressure.Place the die vertically in the work table;By applying a certain amount of pressure to the surface of the die, the die can be closed to meet the requirements of die assembly.

2. Equipment composition of Aluminium extrusion die assembly machine
1 frame
2 Die work table mechanism
3 A set of hydraulic up and down moving mechanisms
4 A set of flat hydraulic mechanisms

3.Operating process flow for Aluminium extrusion die assembly machine
1 Start the motor
2 Oil pump supply operation
3 Place the die vertically on the workbench
4 Hydraulic transfer into the work area
5 Align the upper and lower pins of the die
6 The center of the die is coaxial with the center of the pressure cylinder
7 The main cylinder drives the pressure plate to press the die positively to achieve the purpose of die installation
8 Hydraulic removal, screw on the screws
9 reset
10 Die assembly completed

4.Equipment parameters for Aluminium extrusion die assembly machine
1 Model: Vertical four column type
2 Dimensions: Length 2200mm X Width 1000mm X Height 2200mm
3 The thickness of the upper plate is 100mm.
4 The thickness of the lower plate is 100mm.
5 The middle guide plate is 100mm thick.
6 Four pillars of ￠ 100mm, length of 1440mm, chrome plated and polished on the outside
7 Four sets of guiding copper sleeves, designed with lubrication grooves and oil nozzles
8 Maximum die: ￠ 650mm
9 Maximum height of die: less than 400mm
10 Workbench: Hydraulic lifting
11 Die inlet and outlet: hydraulic inlet and outlet
12 Oil pump: Hengyuan brand HY63Y-RP/LP
13 External appearance of fuel tank: 1000mm in length, 1000mm in width, and 600mm in height
14 Main cylinder: cylinder inner diameter ￠ 230mm, cylinder shaft outer diameter ￠ 160500MM stroke, maximum tonnage: 80T
15 Inlet and outlet cylinders and tonnage: ￠ 100- ￠ 63-800 20T
16 System pressure: 31.5MPa, normal use is within 25 MPa
17 Motor power: 11KW-4 poles, voltage 380 volts, frequency 50HZ, produced by Jiangsu Gaoke Motor.
18 Spray paint requirement: First apply a layer of anti rust paint, then spray a layer of color blue topcoat.
19 Directional valve: Oil Research brand
20 Overflow valve: Huade brand
21 Valve block: self-made
22 Electrical switch: Schneider
23 Seal: Tianjin.