Aluminium tube conform extrusion press machine line

Aluminium tube conform extrusion press machine line

Conform extrusion machine line for Aluminium tube production (Model 300)

Advantages for Conform extrusion press machine line for Aluminium tube production

1. The continuous extrusion equipment is to extrude the aluminum rod to generate high pressure and high temperature. Through mold extrusion forming, it can adapt to small-batch production of various kinds, and can also adapt to large-batch production.1. The continuous extrusion equipment is to extrude the aluminum rod to generate high pressure and high temperature. Through mold extrusion forming, it can adapt to small-batch production of various kinds, and can also adapt to large-batch production.
2. Through the high-pressure and high-temperature treatment, the influence of defects (cracks, burr and so on) existing in the raw material on the finished products can be eliminated.
3. To increase the density. The finished products are extruded at high temperature and high pressure, so that the surface is bright and clean, and the dimensional precision is high.
4. The product does not require annealing, and the hardness shall be uniform. The extrusion process can thoroughly eliminate the problem of raw material joint, and the length of the required product is not subject to the restriction of the length of the raw material.
5. The floor area of the extrusion equipment is small, the installation and construction are simple, the energy consumption is low, and the labor intensity is low. The safety during the production process is high, and the production environment is clean, which completely meets the environmental protection requirements.

Characteristics (compared with the machine of the same type) of for Conform extrusion machine line for Aluminium tube production

1. When it is below 20mm², two tubes can be used simultaneously, so as to make the tube of small specifications of about 5mm².
2. The lower feeding mode shall be adopted, to increase the of external water cooling of the extrusion wheel, and improve the rotating speed of the host machine, so as to improve the output.
3. The building block feeding guide mechanism shall be adopted, and there is no surplus material generated during the production process, to reduce the loss caused by the surplus material.
4. The shoe plate shall adopt the cavity-free structure, and it is convenient and time-saving to load and unload the mode, so as to save the production cost.
5. The hydraulic system shall adopt the automatic pressure increase and pressure maintaining structure, so as to maintain the stable extrusion of products of abnormal structure, thin wall and small cross section. When the designed pressure is reached, the hydraulic pump shall stop working. When insufficient, the pressure shall be supplemented, to extend the service life of the hydraulic pump and save the electrical energy.

III. Production line

1 Discharge rack of the aluminum rod

2 Straightening, feeding and cutting machine

3 Aluminum rod brusher

4、 Online aluminum rod cleaning line

5 Extruding machine

6 Lubrication and hydraulic device

7 Cooling circulating system

8 Tension and meter device

9 Tube recoiling machine

10 Electrical control system