Aluminium rod butt cutting machine and die ejector machine

Aluminium rod butt cutting machine and die ejector machine

Functions:

Die butt shear and die ring pusher is the auxiliary equipment at the end process of aluminum extrusion.
this machine is used for cuting the aluminum butt in the die and separating the die from the die holder
This machine operation is simple, running is stable and reliable. This represents the hydraulic equipmen
working takes place of labor working, it is the nice choice at aluminum extrusion industry.
Equipment process:
Switch on the motor…Place the die (with the die holder) on the working table, the cylinder push out..
ixing the die-..-shear cylinder cut the butt.–the cylinder push the die and separate the die-.–cylinder
return–.so the die and die holder separated.
The machine only can use for one die diameter

3.Product advantages and features:

1, Working principle: Separation of die and ring through hydraulic pressure Lift the ring (with die) into the machine, first the cutting of profile tail (aluminium profile remain), and then remove die from the die ring, reducing man work intensity; Improve work efficiency; Cost savings.
2, Equipment composition 1. Frame 2. Main body, workbench
3. Hydraulic station
4. Electrical appliances and cables 3, Running process flow 1. Start motor. 2. The oil pump operates 3. Lifting the die ring 4. Move the die into the working surface
5. do work alignment line.
6. Cut the aluminium profile tail in the die.
7. The hydraulic cylinder moves forward.
8. Push the die out of the die ring.
9. Lift off the die and ring.
10. In the opposite direction, it is to install the die into the die ring
11. Reset.