Container for aluminum extrusion press

Container for aluminum extrusion press

Email this to someoneShare on FacebookShare on LinkedInPin on PinterestShare on VKShare on TumblrShare on RedditBuffer this page
INQUIRY

Container for aluminum extrusion press

Number Item Descriptions
1 Product name Container for aluminum extrusion press with heating system
2 Materials H13 steel+5CrMoMn
3 Way Of Heating vacuum heat treatment
4 Delivery Time 30-45 working days
5 Flow Manifold Computer simulation
6 Application aluminum press extrusion container and extrusin liner
7 Package Wooden box

The aluminium extrusion container and liner is the main part of the extrusion press. many billets work in the container and the liner during usage. The performance of container and liner rest with persistent maintenance and liner processes at correct tolerances.

life-time Factors for the liner and Container for aluminum extrusion press:

1)Steel materials

1).Heating and cooling cycle.

2).High temperatures influence the features of steel and excessive temperatures can result in serious damages.

3).The wear of the liner during the extruding working

4)The extrusion pressure effect progresses from the liner towards the container. The liner and the container will be harmed earlier or later case of excessive pressures.

Solution for improving life time of extrusion press container and liner:

1).Use the quality steel.

2).Apply latest assembly strucuture for liner and container

3).Apply lastest heating system

4).Produce and install liners compliant with the highest standards.

5).Use precision and advanced heat treatment equipment

Extrusion press container and liner maching processing:

1).Rough turning 2).Rough boring 3).Fitter 4).heat treatment 5).Fine turning 6).Fine boring

Heat Treatment:

Qualiy container and liner need quality heat treament.For liner,use oil quenching equipment for stress relieved then do tempering three times,hardness should reach HRC48-52. For out container,the quenching and tempering tempreature should be under better control,not low or excessive,otherwise steel performance will be influenced.Its hardness should reach HRC38-42

Extrusion liner change/liner replacement remarks:

1)Use brand high quality steel for the new liner

2)Test the container against cracks and damages.

3)Measure the hardness of every area of the container.

4)Doing heat treatment

5).Remove the damaged liner and the liner holder when necessary.

6).Amend the container or liner holder surfaces as a result of the assessments.

7).Complete the production of the new liner in the determined dimensions.

8).Doing heat treatment

9).Assembly liner into container

Email this to someoneShare on FacebookShare on LinkedInPin on PinterestShare on VKShare on TumblrShare on RedditBuffer this page