skip to Main Content

1540 UST 152mm 6 inch aluminium extrusion press machine

1540 UST 152mm 6 inch aluminium extrusion press machine

Inquiry
Category:

1540 UST 152mm 6 inch aluminium extrusion press machine

1540 UST 152mm 6 inch aluminium extrusion press machine is four-column high pressure short stroke with prestressed horizontal type hydraulic pressing machine specially designed for extruding civil aluminum profile and industrial profile.
Technical Parameters for 1540 UST 152mm 6 inch aluminium extrusion press machine:
(1)Billet size: (6")Φ152mm, length 850mm.
(2)Extrusion capacity
Diameter of main cylinder plunger:      Ф800mm
Diameter of side cylinder plunger:      Ф180mm×Ф140mm×2
Diameter of container plunger:         Ф160mm×Ф100×4
Diameter of shear plunger:            Ф160mm×Ф100
Total extrusion strength:               260kg/cm2                 1439ton
Main cylinder extrusion:                260kg/cm2                 1306ton
side cylinder extrusion:                 260kg/cm2                 132ton
container lock-up:      140/kg /cm2                140 ton
shear: 260/kg/ cm2                 52ton
(3)Theory speed of 1540 UST 152mm 6 inch aluminium extrusion press machine
main cylinder fast forwarding speed:  255mm/sec
main cylinder fast draw-back speed:  391mm/sec
extrusion speed:     0~14mm/sec
container lock-up: 343mm/sec
container open: 434mm/sec
shear down:    447mm/sec
shear up: 490mm/sec
Under the circumstance of no billet, every extrusion circle is less than 16 seconds.
(4)Die size: outer diameter ф350mm, length:300mm
(5)Discharge gate siz: Φ220㎜×240㎜
(6) Heat exchanger:  30㎡
(7)Loader uses translational loader.
(8)(guide pillar):Φ260㎜
(9) Machinery outer dimension:   Length10500mm* width3900mm *height4200mm
(10)Total weight:  85Ton.
1540UST(1400T) Press Specification for 1540 UST 152mm 6 inch aluminium extrusion press machine
(1)  oil pump
main oil pump:A15VSO175E2DRCHV ( REXROTH)   *3sets
auxiliary pump:SQP43-60-38         (TOKYO KEKI)    2set
                       SQP4-60             (TOKYO KEKI)   1set
(2)  hydraulic parts:
The high-pressure hydraulic parts are from Rexroth, another parts are from Taiwan.
(3)  motor:
main motor: YE3-315S-6-75KW    *3set(Dongguan Motor)
pressure leading motor:    YE2-132S-6-3KW      1set
pressure leading pump : PV2R1-10RAF1      1set
the container’s temperature: 380-430℃
(4)Material:
main cylinder:   forging steel
main plunger:   35#forging steel( surface welded stainless steel)
front plate:   35# casting steel
dies sliding base:   45#  forging steel
butterfly plate:   35# casting steel
connecting pipe:   45# forging steel
temperature conservation part: 35# casting steel
container:  5crmnmo
container liner:   H13 forging
stem:   H13 forging
extruding part:   H13 forging
bottom shelf: 35# steel and steel plate welding
(5)Electrical Parts:
PLC: MISBUSHI FX3U-128MR、TAIWAN MT-8102IP HMI screen, displaying press situation and extrusion speed Equipped with automatic hydraulic digital controlled system, this press has functions of :
a)  display of set speed and actual speed
b)  same speed controlled and speed changed control
c)  display of set electric current and actual electric current
d)  actual position, speed changed position and after extrusion position
e) switches group position setting
f) break-through pressure testing
g) timing showing parameters.
h) system working parameters setting
B.This press is equipped with position transducer and data display and adjustment. Under automatic situation, extrusion speed can also be adjusted.
AC contactor: MISBUSHI
stroke switch: Tend,Taiwan
Relay: Basel, UK,.
1
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right