skip to Main Content

Why big extruders start hot aluminum billet peeling machine?

Why big extruders start hot aluminum billet peeling machine?

Why big extruders start hot aluminum billet peeling machine?

Aluminum billet peeeling work in the round blade:

After peeling,1mm thickness remove,you can see the smooth surface:

After peeling we can get a whole scrap flower,easy for recovery:

Why use hot aluminum billet peeling machine?

Because of natural oxide action,the billet surface is with oxide film,and the surface also maybe be involved with impurity.This impurity is the main problem to influence extrusion quality.Big extruders start peeling machine to remove the impurity.

Hot aluminum billet peeling machine features:

1.Peel aluminum billet oxide layer,remove impurity,and roughness can reach Ra6.3

2.Automatically work,high working speed for dead cycle and save labour costs

3.The peeling flower thickness is even and whole,easily for recovery

4.Install peeling machine between heat furnace and press,not need more space for installation.

If you wanna start billet peeling machine please carefully consider:

1.After peeling work,the aluminum billet diameter will be thin 2mm (as a sample),so casting table need to be changed to achieve same diameter for press operation.

2.Generally the space is small between heat furnace and press if not considering billet peeling machine,when extruders wanna start peeling machine,the heat furnace maybe need to move for installing peeling machine.